Больше информации по резюме будет доступно после регистрации
ЗарегистрироватьсяWas online more than two weeks ago
Candidate
Male
Not looking for a job
Canada, willing to relocate (Armenia, Great Britain, Greece, Georgia, Indonesia, Iceland, Spain, Italy, Kazakhstan, Qatar, China, Kingdom of Saudi Arabia, Lithuania, Malaysia, Republic of Maldives, Malta, Moscow, Norway, UAE, Poland, Portugal, Russia, Romania, USA, Singapore, Thailand, Turkey, Philippines, Finland, France, South Korea, Japan), prepared for business trips
Senior Mechanical Engineer // Project Engineer
Specializations:
- Other
Employment: full time, part time, project work, work placement
Work schedule: full day, shift schedule, flexible schedule, remote working, rotation based work
Work experience 28 years 6 months
November 2016 — currently
8 years 5 months
Yamal LNG Project of Novatek, Russia (capacity of 16.5 million tons per year)
Russia
Oil and Gas... Show more
Senior Rotating Equipment Engineer, Yamal LNG, Russia
• Supervising field construction team for BOG compressors,Pumps, Steel, Equipment – Flare, Interconnecting, EDG – site construction: resolving issues related to site construction/ field execution
• Providing support to construction & commissioning activities of Pumps, Instrument Air & Boil-Off Gas compressors, Nitrogen generation, HVAC units of chemical storage building, & flare installations
• Follow up activities of site instructions, equipment preservation, job cards, closing punch list items, ensures work is in conformance with plans, specifications, and schedules.
• Providing input during project review of ITR / ITP, Review of lifting procedures and method statements, commissioning & testing procedures, Vendors installation and operation manuals.
October 2014 — August 2016
1 year 11 months
Qatar Kentz W.L.L (Member of SNC Lavalin Group)
Lead Mechanical Design Engineer
• Reviewed/prepared specification, data sheets, requisition, Bid Tabulation, Vendor’s documentation for centrifugal and chemical injection pumps
• Provided input to prepare P&ID, ITP, QA/QC documents, Equipment List, Material Selection Diagram, Process Studies and HSE procedures.
• Prepared Report on cooling water requirements for DS6, DS7 & DS8 (ExxonMobil, Iraq West Qurna Project) based on available vendor seal data for Centrifugal Pumps.
• Review of Vendor (Atlas Copco) documentation, closing punch item from Factory Acceptance Test and updating as-built documentation for Air Compressors and Nitrogen Generation Packages (Sangachal Shah Deniz, Flare upgrading AMEC – ECMS / BP Projects project)
• Support to the site construction /commissioning team, conducting site visits, and contributing to the engineering query for Produced Water Export Pumps Modifications for Higher Flow Rates.
• Presented a paper on “Product Quality and Reliability Management” in Lunch & Learn Program.
• Proposal Projects:
- 15EE023IQ_TAQA: Atrush Gas Sweetening Facilities FEED Study, Block K4
(Atrush Field) in Kurdistan, Iraq
- PE16EF001QA- Zekreet Project Phase I: EPC for RALF2 Finished Gasoline Storage,
Export / Import Facilities in Ras Laffan Industrial City, Qatar
- Review of FEED data sheets, Specifications, PIDs, Process Data sheets
- Review of project mechanical Scope, updated equipment list, estimate budget & resources (CTR)
- Prepared Bid packages: Horizontal API/ANSI, PD (injection), Firewater & Jockey Pumps, Emergency Diesel Generators, Instrument Air Compressors, Material Handling equipment
March 2011 — April 2014
3 years 2 months
Senior Supervising Mechanical Engineer, Worley Parsons, Houston, USA
USA
Oil and Gas... Show more
Senior Principal Rotating Equipment Engineer
• Responsible for Mechanical Rotating Equipment Activities and Deliverables - Prepared engineering studies FEED reports, specification, data sheet, RFI, RFP, Technical Clarifications & Bid evaluation
• Prepared data sheets, specification, MR for Turbine Driven Main (GE) Generator Packages, MODEL LM2500+ / PGT25+ (30,226 kW), & Electric Motor Driven LP1/LP2 Compressors (Howden) on one skid (Dry Screw Type)
• Review of Vendor drawings and documents for crude export and other key API process pumps including firewater pumps, gland seal water cooling for slurry pumps, diesel engines.
• Chevron FEED activities of Rosebank offshore FPSO project, prepared specification, data sheets and requisition for Nitrogen generation, fuel gas conditioning, fixed bed H2S removal packages
• Conducted meetings with suppliers, clients, and other Company disciplines, producing documentation required for weekly conference calls, resolved specification deviation & vendor change order requests.
October 2009 — February 2011
1 year 5 months
Operations – Capital Projects, CAEL - RasGas, Qatar
Qatar
2009 – 2011 Lead Mechanical Equipment Engineer
• Supervised mechanical engineering EPCM team on multiple Brown Field LNG process equipment - worked with Civil, & maintenance team, reviewed the FEED, detailed design, vendor documents.
• Monitoring and surveillances of Contractors site activities, Providing HSE leadership and reporting any unsafe acts or conditions, and working with the Company and Contractors to deliver expectations
• Provided support to the different upgrading/modification projects such as LPG BOG Compressors (Dresser Rand) Check Valve Installations, Replacement of Mag drive pumps (API 685), Low NOx retrofit boiler (Stork Ketels), 145T/hr and gas turbine (GE Frame 6&7), Antifoam injection Package, Condensate supply pumps, fresh water cooling pumps (EBARA) for Helium Extraction Unit/Utilities.
• Prepared/reviewed project deliverables, such as Project Execution Plan, Design Basis Memorandum, project schedules and procurement plan, progress reports, and assisting other project engineers in preparing discipline man-hour estimates, CTRs, & key deliverables.
May 2004 — July 2009
5 years 3 months
AMEC Foster Wheeler USA Corporation, Canaport LNG, Canada
Canada
Senior Principal Rotating Equipment Engineer
• Reviewed engineering documents, prepared Field Inspection reports on firewater pumps and packages, diesel-generators, air compressors, SCV Blowers (Linde), BOG Compressors (Burckhardt), Cryogenic LP/HP Pumps (JC Carter), and offshore marine platform equipment including marine unloading arms
• Provided technical support to Construction sites, maintenance/installations and troubleshooting, mechanical completions, commissioning start-up assistance, FAT & SAT test for firewater pumps
• Prepared progress reports & informing project managers about project commissioning progress status, Coordinated Compliance of Quires (CQ's) arising from the Contractor during Module Fabrication process; and closing punch list items
• Reviewed P&IDs, project energization plan, start up spares, commissioning & Site HSE, ITP procedures, Installation and Operation Manuals, coordinated for pre-start safety review, attended toolbox meetings.
• Ensured that rotating equipment inspection and testing procedures and methods are adequately developed and specified, including requirements for equipment leveling, equipment alignment, lube oil flushing, pipe cleaning and run-in procedures
March 2002 — April 2004
2 years 2 months
Pratt & Whitney Canada/ Sheridan College, Canada
Canada
Mechanical Engineer/ Reliability Engineering Consultant
Mechanical Design Engineer/Consultant, Pratt & Whitney Canada/ Sheridan College, Canada
• Reviewed the design of the coolant pump of OE600A reciprocating engine, suggested modifications of engine coolant pump testing facilities and developed the testing procedures.
• Worked as a consultant at Pratt & Whitney Canada (P&W) for continuous improvement of equipment availability, reliability and ensured equipment failures are fully recorded and appropriate failure analysis techniques are applied to establish root causes.
• Conducted the American Society for Quality (ASQ) training program on Quality Management, Reliability Engineering and Product Safety organized by Aircraft Maintenance Engineers’ Association, Mississauga, and Sheridan College, Canada
• Provided training to more than 30 plant engineers’ and technologists on APQP TS 16949, SPC tools: Quality Management systems, Lean tools, Six Sigma, Capability Studies, FMEA, and Quality Audit
May 1998 — February 2002
3 years 10 months
University Putra Malaysia
Malaysia
Senior Project Engineer
• Worked with KJ Engineering Bhd. as a consultant to design a District Cooling Project for the new engineering complex building - about 1185 RT, direct chiller and thermal energy storage. Annual saving from the implementation of the DCS project is RM 930, 667 (C$423,000) with IRR 17.4%).
• Directly involved in conversion of Diesel to CNG-fueled spark ignition engine, solved the performance dispute of motor-pump of Kumara Corporation with their clients, consultancy to steam turbines - Failure analysis and servicing schedule of Palm Oil Mill Boiler.
• Co-ordinated, joint research and development projects with university to develop gas engines, automotive parts, and worked with external suppliers, actively participated in planning and supervision of Quality Auditing activity, and implementing ISO 9001
February 1993 — May 1995
2 years 4 months
Gazipur LP Gas /Diesel Plant Ltd, BSEC
Bangladesh
Mechanical Design /Test Engineer
• Coordinated the design & constructability analysis, installation, commissioning, field tests and final handover of pumps and BDP-DEUTZ diesel engines in 17 different vessels of dreadger organization
• Designed and developed engine parts, gearbox, designed and developed 150 M3/h capacity pump which reduced operating cost more than 15%
• Reviewed equipment inspection and test plans to verify that Execution Contractor is performing all required inspections and witnessing all required tests and add witness and hold points for inspection.
• Prepared commissioning and startup procedures, operational manuals, and project deliverables completion schedules’ supervised engine tests and reviewed test results, calculated the derating power factor for the operating condition and adjusted with the declared engine power with DIN standard
• Developed testing methodology and techniques determined the scope and limitations of a diagnostic tool for service life prediction and maintenance scheduling of marine diesel engines.
• The findings and recommendations of my research on condition based maintenance of power plant is used by the fleet, Murmansk Sevrib, Russia to evaluate the performance of marine diesel engines.
Skills
Skill proficiency levels
Driving experience
Own car
Driver's license category AAbout me
Mechanical Engineer – Rotating Equipment - Senior / Lead
Dear Recruitment Manager,
Please find attached to this email, a copy of my CV for your kind consideration. I feel I would be an excellent candidate for the above vacancy as it closely matches my skills and experience.
I have been involved with different senior/lead mechanical engineering roles with different World leader of EPC / PMC Company such as AMEC, Chiyoda Japan, JGC, Worley Parsons, SK Engineering Korea, and Foster Wheeler USA Corporation. I am also experienced with the several similar Arctic environment projects such as Hebron offshore, Murmansk sevrib, and currently with Yamal LNG, Russia (since 2016).
I worked with upgrading/modifications of Brown Field Refinery Projects of RasGas, applied condition-based maintenance approaches for Murmansk Sevrib fleet engines, Russia, & also worked with Mechanical Maintenance and refinery process equipment; improvement of Firefighting Facilities at Shuaiba Refinery, Kuwait National Petroleum Company.
My most recent activities in Yamal LNG are:
• Providing support to construction/commissioning activities of Boil-Off Gas compressors, Utility pumps and Air Compressors, Nitrogen generation packages, HVAC units of chemical storage building, Flare, and EDG.
• Follow up activities of site instructions, equipment preservation, job cards, closing punch list items, review of plans, specifications, and schedules.
In addition, I would like to mention that I am fluent both in Russian and English and familiar with Russian GOST and standards which makes me easy to contribute to the team members and supporting/monitoring the site activities. Please let me know your convenient time to call. My contact details are as below:
email: abulhossain@yahoo.com
Ph: +1905 2739814 (res)
Kind Regards
Abul
WhatsApp number: +968 7925-8652
Higher education (master)
2003
Sheridan Institute of Technology and Advanced Learning, Ontario, Canada
Post Graduate Diploma, Quality Assurance - Manufacturing and Management, Post Graduate Diploma, Quality Assurance and Management
1987
Astrakhan State Technical University, Astrakhan, Russia
Mechanical Engineering, Mechanical Engineering
1987
Mechanical Engineering, METALLURGY, MECHANICAL ENGINEERING AND MATERIAL WORKING
Languages
Professional development, courses
2009
• LNG operations - Qatar Gas Facilities
Qatar Gas Facilities, Chiyoda Corporation, Japan, LNG operations and Maintenance
2009
Construction Safety
Canaport LNG, Saint John, Canada, Health and Safety
2007
Project Execution and Management
• Project Execution Training, AMEC- KOC, Kuwait, Project Management
1998
ISO 9001 Internal Quality Audits, University Putra Malaysia
University Putra Malaysia, Quality Assurance
1993
Project Management
AOTS, Tokyo, Japan, Project Management
Tests, examinations
2004
Certified Quality Engineer, CQE
American Society for Quality, ASQ, Quality Assurance and Manufacturing Management
2003
Sheridan Institute of Technilogy and Advanced Learning, Ontario, Canada
Sheridan Institute of Technilogy and Advanced Learning, Ontario, Canada, Post Graduate Diploma, Quality Assurance - Manufacturing and Management
2003
Professional Engineers Ontario, Canada
Professional Engineers Ontario (PEO), Canada, Memeber of the Association of Professional Engineers, Ontario, Canada
1987
Astrakhan State Technical University, Russia, Mechanical Engineering, M.Sc
Astrakhan State Technical University, Russia, Mechanical Engineering
Citizenship, travel time to work
Citizenship: Canada
Permission to work: Russia
Desired travel time to work: Doesn't matter