• Worked as a QC inspector as Yokogawa Representative, conducting FAT for analyzer shelters Responsible for Design & Layout approvals, IFC drawings approvals, BOM, Integration and client acceptance. • Conduct & Manage FAT/SAT testing in a timely manner and clear all Punch lists within the specified time. • Coordinate with third party inspectors to perform inspection & punch list based on the ARAMCO requirements. • Inspected & Witnessed cable megger & continuity test before & after Termination of LV Cables. • To verify Cable gland tightness, Cable Core Marker exact termination point of each cable core as per Approved Wiring Drawing. • Performed Loop check & Functional check based on Cause & Effect matrix, Logic test for Fire & Gas System, detectors, and Process Instruments. • Conduct activities and inspection in accordance to the Project Quality Control Inspection Plan(ITP). • Involved in FAT (Factory acceptance test) for Analyzer shelters, vendor skid, Fire analyser shelter.

• Performed as an Instrument QC Lead under process-1 furnaces, the crew members consisting of four QC inspectors and six instrument technicians. • Achieved Best QC Inspector (Electrical & Instrumentation) for SHELL DBN Project. • Attained Singapore workforce skills Qualification in Supervise Workplace Safety and Health in process plant • Responsible for close monitoring of construction activity in line with the client specified standards. • Keeping strict implementation of the design/drawing specification. Monitoring and control of the documents drawing used by the construction are the updated / latest revision. • Make immediate query or action regarding any changes in the design or drawing considering the actual site condition. • Implementing the quality control procedures and instrument test plan (QCP / ITP) as per the site work instruction (SWI) required. • Instrumental in reviewing & approving Contractor’s / Supplier’s Documents i.e. Purchase Orders (PO), Inspection Test Plans, Inspection Assignment Packages, Quality Procedures, Work Instructions, Method Statements & Inspection Reports. • Responsible for the execution of all instrumentation inspection prior to acceptance of the client. • Efficiently issued Non Conformance & Site Inspection Reports for non-compliance activities against the approved quality procedures, inspection test plans, codes & standards and closed out on satisfactory corrective / preventive actions. • Preparation of individual instrumentation Inspection Report ( I.R. ) such as primary and secondary instrument cable tray installation, primary and secondary cable insulation and continuity test, primary and secondary cable pulling, glanding and termination from instrument to field junction box and from junction box to instrument equipment shelter ( IES ) continuity test and open and close loop checking. Instrument, impulse tubing, instrument air, Analyzer, gas detector, fire detector, Public Address (PA) and all vendor installation as per P&ID and ILD. • Oversaw the installation & testing of Electrical / Pneumatic Hook-Ups: Cable Routing, Laying, Segregation, Sealing, Termination & Grounding. • Witnesses in calibration of transmitters as per the project quality requirements. • To verify Cable gland tightness, Cable Core Marker exact termination point of each cable core as per Approved Wiring Drawing. • Witnessed Calibration of instrument like pressure, level, temperature, pressure switch, temperature switch control valves I/P converters. • Assist in plant commissioning, loop checking, function test & safety Interlock check. • Carried out daily job activities after receiving RFI (Request for inspection) from contractor and completion of inspection report, Non-Compliance Reports, etc. • Inspection QVD’s/EQCC completed statement are stored in the database and closed out in the GO-Completion system as per the project requirements. • Review of Vendor Instrumentation Drawings as per immediate site requirement. Mark up on Process and Instrument Diagram (P&ID) and Hook up diagram, loop diagram implementation to the site requirements. • Inspected & Witnessed Instrument Cable Duct Bank, Cable Pulling from FAR to J.B & Control Room and RGS conduit, instrument stanchion, Marshalling Panel, Junction Boxes installation, Mounting of Transmitters such as pressure, level, temperature, Flow and Control valves, Analyser shelters, Rack system as per Project Specifications and standards. • Inspected & Witnessed cable megger & continuity test before & after Termination of LV Cables. • Performed Loop check & Functional check based on Cause & Effect matrix, Logic test for Fire & Gas System, detectors, and Process Instruments. • Carried out functional checks of ESD loops and interlock system along with implementing new facility changes from operation. • Holds the credit of representing the company in final walkthrough, Generation of Punch lists, expedite timely close out as per A, B and C categories

• Performed as Instrument Engineer as JAC representative in aromatics and reformer section. The crew member consists of five instrument technicians. • Involved in F.A.T. & S.A.T. for the PLC packaging unit like air compressors, gas compressors, and dryer units. • Performing inspection for the PLC packaging unit and carry out loop check between PLC to DCS and verifying communication MODBUS test. • Responsible of Reviewing documentation punches & field punches. • Involved in troubleshooting during loop check and ESD check. • Hands on experience in Allan Bradley, Modicon and Schneider PLC, Knowledge in Yokogawa DCS Centum VP and Delta V systems for ESD loops. • Preparation of Instrument calibration procedures for maintenance. • Responsible of Raising purchase order and purchase request in behalf of JAC under Instrumentation dept. • Assist in plant commissioning, loop checking, function test & safety Interlock check.

• Performed as Exxon Mobil Representative for the Role of witness point, carried out Final visual inspection of various instruments in utilities/Hot ends and Cold ends at initial stage of project and later supported as loop check witnesses, involved in commissioning and start-up activities at the final stage. • Responsible of Reviewing documentation punches & field punches as per Exxon Mobil GP (Global Practices) and GIII. • Involved in preparation and review of loop check procedures and functional check procedures based on the engineering requirements. • Make request for Initial walk thru with the client for every first stage of Construction activity to anticipate Quality problems at early stage. • Leveraged skills in reviewing & approving EPC Contractor’s inspection & test plan, work procedures and method statements. • Adept at recommending / implementing test equipment calibrations to enhance operational efficiencies of the systems. • Installation inspection of impulse tube, airline pneumatic air header as per hook-up and AFC Drawing. • Inspection of pressure testing /leak test of all pneumatic lines, impulse lines. • Steered efforts in reviewing Mechanical Completion Dossiers, As-built drawings and Instrument Loop test Packages. • Involved in SAT for the sanco fire alarm panel, GTG water wash and water mist skid and also testing of instruments based on cause & effect matrices. • Involved in calibration of instruments as the role of witness point. • Involved in plant startup and commissioning activities in olefins and utilities. • Hands on experience in Triconex safety system and Honeywell DCS control system. • Prior to plant startup carried out functional check and safety critical check procedures of field instruments and verifying the trip logics.

• Worked as a C&I Team leader in shutdown maintenance of power plant that includes Gas Turbine, HRSG, Demineralised plant. The crew member consists of four technicians. • Responsible of preparing calibration of all various instruments loop check & firefighting systems during shutdown activities

* • Instrumental in reviewing & approving Contractor’s / Supplier’s Documents i.e. Purchase Orders (PO), Inspection Test Plans, Inspection Assignment Packages, Quality Procedures, Work Instructions, Method Statements & Inspection Reports. • Responsible for the execution of all instrumentation inspection prior to acceptance of the client. • Efficiently issued Non Conformance & Site Inspection Reports for non-compliance activities against the approved quality procedures, inspection test plans, codes & standards and closed out on satisfactory corrective / preventive actions. • Preparation of individual instrumentation Inspection Report ( I.R. ) such as primary and secondary instrument cable tray installation, primary and secondary cable insulation and continuity test, primary and secondary cable pulling, glanding and termination from instrument to field junction box and from junction box to instrument equipment shelter ( IES ) continuity test and open and close loop checking. Instrument, impulse tubing, instrument air, Analyzer, gas detector, fire detector, Public Address (PA) and all vendor installation as per P&ID and ILD.

• Performing Calibration and Preventive Maintenance of various types of measuring instruments such as Temperature, Pressure, Level, Flow, weight and analyzers. • Carry out Wet & Dry calibration foe the flow transmitters such as Vortex, Coriolis mass flow transmitter, electromagnetic flow transmitter and ultrasonic flow transmitter. • Involved in PLC up gradation project which includes in hardware design, and managed installation and commissioning aspects of the PLC. I am also responsible for managing vendors and contractors to perform site installation, commissioning and testing. • Also, done small in-house projects like installation and commissioning of instruments, Updating of loop drawings, P&I drawings and DCS drawings.

worked as a BMS engineer in nokia project sriperumbudur

Worked as a Assistant engineer managing powerplant activities

Electrical, Electronic Instrumentation and Devices

Singapore workforce skills, Process Plant